# Linearity and Bias using Minitab

## Linearity and Bias using Minitab

To calculate Linearity and Bias using Minitab, the below may be used

Linearity Minitab2

Linearity2

Linearity Minitab_Final

Basis the P value received from the test, u should take a call if your linearity and Bias are acceptable or not.

If the P values are greater than 0.05 we shall consider that the Measurement System is adequate.

8 thoughts on “Linearity and Bias using Minitab”

Pingback: Sources of Variation | AIG Blog

## Comments (0)

## Facebook Comments